Cidco Communications Corporation CL915 ユーザーズマニュアル
FEATURES AND CONTROLS
19
N
EW
C
ALL
L
IGHT
The NEW CALL light will flash for the following reasons.
1. When the phone is ringing the light will flash rapidly.
2. When you receive a Caller ID call the light will flash. The phone will
store a record of this call.
3. When you have a new Voice Mail message the light will flash to alert
you and the screen will display the message MESSAGE WAITING.
U
SING
A
H
EADSET
You can make or answer calls with hands-free convenience using an op-
tional headset that has a standard (2.5 mm) plug.
tional headset that has a standard (2.5 mm) plug.
Follow these steps to use a headset.
1. Insert the headset’s plug into the headset jack on the side of the
handset.
2. Place the headset on your head with the earpiece over either ear
and adjust the microphone boom until it is about even with your
chin.
chin.
3. The headset volume can be adjusted by pressing the volume key
(see Location of Controls and Features on page 11).
N
OTE
Connecting a headset disconnects the handset’s earpiece and micro-
phone.
phone.
T
IP
If you place the handset on the base to recharge it while the headset
is connected, be sure the handset seats properly or it will not
charge. A good way to be sure the connection has been made is to
check that the red CHARGE light is on.
is connected, be sure the handset seats properly or it will not
charge. A good way to be sure the connection has been made is to
check that the red CHARGE light is on.
L
OCATING
A
L
OST
H
ANDSET
Your CL915 has a PAGE button to help you locate the handset when it is
not on its cradle.
not on its cradle.
1. Press the PAGE key on the base. If the handset is within range, it
will beep for 20 seconds.
2. Press any key on the handset to stop the PAGE beeping or wait for
20 seconds and it will automatically stop.
CL915.book Page 19 Friday, May 4, 2001 11:35 AM