Cidco Communications Corporation CL915 ユーザーズマニュアル

1. Pick up the handset from the base.

2. Press the TALK key. The display will show CONNECTING. Once the 

phone has acquired a line, the display will show the channel that it is 
using (e.g. CHANNEL 15). Wait until you hear a dial tone.

3. Dial the number you wish to call.

You can predial the number before you press the TALK key. 
The number displayed will be dialed once the TALK key is 
pressed.

4. After 3 seconds of the line being active, the display will show the call 

timer.

5. When you are finished talking, press the TALK key or place the unit 

back into the base to end the call. The call timer will display for a 
short time after the call has finished.

The IN USE light on the base will illuminate when the line is active.

You can quickly redial the last number dialed.

1. Press the REDIAL/PAUSE key. The display will show CONNECTING. 

Once the CL915 has acquired a line, the display will show the 
channel that it is using (e.g. CHANNEL 15). 

The redial memory holds up to 32 digits, so you can redial long distance 
as well as local numbers.

The redial memory does not store a flash entry or any digits entered after 
you press 3-WAY/FLASH.

 is used for special services, such as Call Waiting. For ex-

ample, if you have Call Waiting, press 3-WAY/FLASH to answer an incom-
ing call without disconnecting the current call. Press 3-WAY/FLASH again 
to return to the first call.

If you do not have any special phone services, pressing 3-WAY/FLASH 
might disconnect the current call.

CL915.book  Page 21  Friday, May 4, 2001  11:35 AM