Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide
158
5.6.3.0.5 Step 3: Configure QoS Classes
Finally, the DL-Management SFC and UL-Management SFCs created in Step 2 must be added to each QoS Class used by the
Quick Bridge network. Additionally, within the QoS class, these SFC must have the three PIRs mentioned in Step 1 associated
with them.
Quick Bridge network. Additionally, within the QoS class, these SFC must have the three PIRs mentioned in Step 1 associated
with them.
1. Add SFCs to QoS Class.
a. Navigate to ADVANCED CONFIGURATION > QoS > Class list.
b. Click Details corresponding to the first class (Unlimited Best Effort) you wish to modify.
c.
Under the QoS Class Service Flow, click Add.
d. Configure the following parameters, and click Add. This adds the New SFC & PIR relation to the QoS Class.
•
Service Flow Name: DL-Management
•
PIR Rule Name: ARP
•
PIR Priority: 63
•
Entry Status: Enable.
e. Again click Add under the QoS Class Service Flow Details.
f.
Configure the following parameters and click Add. This adds the New SFC & PIR relation to the QoS Class.
•
Service Flow Name: UL-Management
•
PIR Rule Name: ARP
•
PIR Priority: 63
•
Entry Status: Enable
2. Add PIRs to SFCs within the QoS Class.
a. Navigate to ADVANCED CONFIGURATION > QoS > Class list.
b. Click Details corresponding to the first class (Unlimited Best Effort) you wish to modify.
c.
Under the QoS Class Service Flow Details, click Details corresponding to the DL-Management Service Flow.
d. Under the QoS Class PIR Details heading, click Add.
e. Add the Management Station SRC IP PIR to this Service Flow by configuring the following parameters:
•
PIR Rule Name: Management Station SRC IP
•
PIR Priority: 63
•
Entry Status: Enable
f.
Return to the Class List and add the UL-Management Service Flow in this class.
g. Add the Management Station DST IP PIR to this Service Flow by configuring the following parameters:
•
PIR Rule Name: Management Station DST IP
•
PIR Priority: 63
•
Entry Status: Enable
5.7 RADIUS Based SU QoS Configuration
RADIUS based QoS configuration enables you to configure QoS parameters on an SU through RADIUS Server. This way of
configuring QoS parameters, reduces the task of manually configuring QoS parameters on each SU available on the network.
configuring QoS parameters, reduces the task of manually configuring QoS parameters on each SU available on the network.
Explained below is the process followed to configure QoS parameters on an SU from a RADIUS Server.