Proxim Wireless Corporation XB92WFR ユーザーズマニュアル

•

Increases the VLAN space in a provider network or enterprise backbone

•

Reduce the number of VLANs that a provider needs to support within the provider network for the same number of 
customers

•

Enables customers to plan their own VLAN IDs, without running into conflicts with service provider VLAN IDs

•

Provides a simple Layer 2 VPN solution for small-sized MANs (Metropolitan Area Networks) or intranets

•

Provides customer traffic isolation at Layer 2 within a service provider network

To configure system-level VLAN parameters, navigate to ADVANCED CONFIGURATION > VLAN. The VLAN configuration
screen appears.

1. VLAN Status: This parameter is used to either enable or disable VLAN feature on the device. By default, this

parameter is disabled. To enable VLAN, select the VLAN Status box. If VLAN status is enabled, it indicates that locally
configured VLAN parameters will be applied on the device. If VLAN status is disabled, it indicates that the device is
open for remote VLAN configuration.

2. Management VLAN Id: This parameter enables the user to configure VLAN Id for management frames (SNMP, ICMP,

Telnet and TFTP). The stations that manage the device must tag the management frames with the management VLAN
Id. By default, the Management VLAN Id is set to -1 which indicates no tag is added to the management frame. To set
VLAN tag to the management frame, enter a value ranging from 1 to 4094.