Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide
163
Figure 5-96 Access Mode
Given below is the table which explains the method to configure the device in Access Mode:
Click OK and then COMMIT.
5.8.2.3 Trunk Mode
Trunk Mode can be configured in a BSU, SU, End Point A and End Point B. This mode is used to connect VLAN aware
networks with VLAN aware networks. In the Trunk mode, the Ethernet interface of the device forwards only those tagged
frames whose VLAN Id matches with a VLAN Id present in the trunk table.
networks with VLAN aware networks. In the Trunk mode, the Ethernet interface of the device forwards only those tagged
frames whose VLAN Id matches with a VLAN Id present in the trunk table.
If the device receives untagged frames and the Allow Untagged Frames functionality is disabled, then the untagged
packets are dropped.
packets are dropped.
If the Allow Untagged Frames functionality is enabled, then functionality varies based on the device:
Parameter
Description
Interface
Displays the name of the Ethernet interface.
VLAN Mode
Select the VLAN mode as Access and click OK.
Access VLAN Id
Enter the Access VLAN Id in the Access VLAN Id box. The untagged data frames received
at the Ethernet interface are tagged with this configured VLAN Id and then forwarded to
the WORP interface. By default, the Access VLAN Id is set to -1 which indicates no tag is
added to the data frame. To set Access VLAN tag to the data frame, enter a value ranging
from 1 to 4094.
at the Ethernet interface are tagged with this configured VLAN Id and then forwarded to
the WORP interface. By default, the Access VLAN Id is set to -1 which indicates no tag is
added to the data frame. To set Access VLAN tag to the data frame, enter a value ranging
from 1 to 4094.
: When Double VLAN is enabled on the device, the Access VLAN ID should not be
set to -1.
Access VLAN Priority
This parameter is used to set IEEE 802.1p priority for the data frames. By default, the
priority is set to 0. To set the Access VLAN priority, enter a value ranging from 0 to 7.
priority is set to 0. To set the Access VLAN priority, enter a value ranging from 0 to 7.
Allow Untagged
Mgmt Access
Mgmt Access
When enabled, the Management Access is allowed using untagged packets.
By default, it is disabled.
By default, it is disabled.