Proxim Wireless Corporation XB92WFR ユーザーズマニュアル

Given below is the table which explains the method to configure the device in Transparent mode:

Click OK and then COMMIT.

Access Mode can be configured in an SU, End Point A and End Point B. This mode is used to connect VLAN aware networks
with VLAN unaware networks. 

The ingress untagged traffic received on the Ethernet interface are tagged with the configured Access VLAN Id and Access
VLAN priority before forwarding to the WORP interface. Similarly all egress tagged frames with specified VLAN Id are
untagged at the Ethernet interface and then forwarded. Based on the Management VLAN ID configuration, both tagged and
untagged management frames can access the device from the WORP interface. However, only untagged management
frames can access the device from the Ethernet Interface; the tagged frames are dropped.

To configure the Ethernet interface of the device in Access Mode, navigate to ADVANCED CONFIGURATION > VLAN >
Ethernet. The VLAN Ethernet Configuration screen appears:

Interface

Displays the name of the Ethernet interface.

VLAN Mode

Select the VLAN mode as Transparent.