Proxim Wireless Corporation XB92WFR ユーザーズマニュアル

Given below is the table which explains the WORP Intra Cell Blocking MAC Table entries and the method to configure the
configurable parameter(s):

After adding the MAC address, click Add.

To edit the existing MAC addresses, click Edit icon in the WORP Intra Cell Blocking MAC Table screen. Modify the
parameters as desired in the WORP Intra Cell Blocking MAC Table Add Row screen and click OK and then COMMIT.

In the WORP Intra Cell Blocking MAC Table, you can change the Entry Status as either Enable/Disable/Delete. Once the
status is changed, click OK and then COMMIT.

Dynamic Host Configuration Protocol (DHCP) is a network protocol that enables a server to assign an IP address to the DHCP
client from a defined range of IP addresses configured for a given network. Allocating IP addresses from a central location
simplifies the process of configuring IP addresses to individual DHCP clients, and also avoids IP conflicts.

DHCP Pool is a pool of defined IP addresses which enables a DHCP Server to dynamically pick IP address from the pool and
assign it to the DHCP client. 

To configure a range of IP addresses in the DHCP Pool, navigate to ADVANCED CONFIGURATION > DHCP > DHCP Server
> Pool. The DHCP Pool screen appears: 

Each pool entry comprises the following tabulated information: 

MAC Address

Represents the MAC address of the SU.

Group ID’s 1 to 16

By default, a Group ID is disabled meaning which the SU is not a part of that group. To 
make it a part of that group, select Enable.

Entry Status

If SU is part of a group and its Entry Status is enabled then it can communicate with all the 
SUs belonging to that group. If Entry Status is disabled, then the communication is 
blocked.

Interface

Specifies the interface type, that is, Bridge or Routing (Ethernet and Wireless).

Start IP Address and
End IP Address

Specifies the start and end IP address of the addresses to be added to the pool.

Delete

Allows you to delete a pool entry.