Proxim Wireless Corporation XB92WFR ユーザーズマニュアル

Management

Tsunami

800 & 8000 Series - Software Management Guide

195

Figure 6-5 Upgrade Firmware - HTTP

2. In the HTTP screen, click Browse to select the latest firmware file from the desired location. Ensure that the file name

does not contain any space or special characters.

3. Click Upgrade.

6.2.3.2 Upgrade Firmware via TFTP

To upgrade the firmware via TFTP Server, do the following:

1. Navigate to MANAGEMENT > File Management > Upgrade Firmware > TFTP.

Figure 6-6 Upgrade Firmware - TFTP

2. Based on the IP mode configure either IPv4 or IPv6 address as TFTP Server address.

3. Enter the name of the latest firmware file (including the file extension) that has to be loaded onto the device in the

File Name box.

4. To upgrade the device with new firmware click Upgrade and then reboot the device, or click Upgrade & Reboot.

•

After upgrading the device with the new firmware, reboot the device; Otherwise the device will continue to run
with the old firmware.

•

It is recommended not to navigate away from the upgrade screen, while the upgrade is in progress.