Proxim Wireless Corporation XB92WFR ユーザーズマニュアル

Management

Tsunami

800 & 8000 Series - Software Management Guide

196

•

If the device configuration is upgraded from the version 2.6.x to 3.0.x, with the channel bandwidth 5MHz, then
the device boots up in the custom compatibility mode with 10ms timeframe.

6.2.4 Upgrade Configuration

You can upgrade the device with the latest configuration files either through HTTP or TFTP.

: Make sure the configuration file being loaded into the device is compatible. That is, the configuration file being

loaded should have been retrieved from a device of the same SKU.

6.2.4.1 Upgrade Configuration via HTTP

To upgrade the configuration files by using HTTP, do the following:

1. Navigate to MANAGEMENT > File Management > Upgrade Configuration > HTTP.

Figure 6-7 Upgrade Configuration - HTTP

2. In the HTTP screen, click Browse to locate the configuration file. Select a Binary Configuration file or a Config Profile

file, or a PXM-TBC.xml for Text Based Configuration file. Make sure that the file name does not contain any space or
special characters.

3. If you are upgrading the device with Binary Configuration file then click Upgrade and then reboot the device.

4. If you are upgrading the device with Config Profile file then click Upgrade and then reboot the device. On upgrade,

the device shall come up with the loaded profile. If the configuration profile is not compatible, then on reboot, the
device will rollback to its old configuration.

5. If you are upgrading the device with Text Based Configuration file then click Upgrade to upgrade the device with the

config file and then click Load for loading the config file onto the device. Alternatively, you can perform both upgrade
and load operation in one single step, by clicking Upgrade & Load.

6.2.4.2 Upgrade Configuration via TFTP

To upgrade the configuration files by using TFTP Server, do the following:

1. Navigate to MANAGEMENT > File Management > Update Configuration > TFTP.