Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide
249
In the Scan Tool screen, select Scan Mode as IPv6 to scan the 82x devices with IPv6 mode. Click Scan to scan and refresh
the devices on the network. The scanned 82x devices are displayed as shown below:
the devices on the network. The scanned 82x devices are displayed as shown below:
Figure 7-39 An Example - Scanned Devices (IPv6)
:
•
ScanTool IPv6 support is applicable only for the 82x devices with IPv6 mode.
•
ScanTool can display a maximum of 50 devices.
7.11.3 sFlow®
Proxim’s point-to-multipoint and point-to-point devices support sFlow® technology, developed by InMon Corporation. The
sFlow® technology provides the ability to measure network traffic on all interfaces simultaneously by collecting, storing, and
analyzing traffic data.
sFlow® technology provides the ability to measure network traffic on all interfaces simultaneously by collecting, storing, and
analyzing traffic data.
Depicted below is the sFlow architecture that consists of a sFlow Agent and a sFlow Receiver.
Figure 7-40 sFlow Architecture - An Example with a BSU and SUs
The sFlow Agent, which is running on devices, captures traffic information received on all the Ethernet interfaces, and sends
sampled packets to the sFlow Receiver for analysis.
sampled packets to the sFlow Receiver for analysis.
The sampling mechanism used to sample data are as follows: