Proxim Wireless Corporation XB92WFR ユーザーズマニュアル

After configuring the required parameters, click OK and then COMMIT.

Reboot the device, if you have changed the Admin Status configuration.

The Advanced Configuration feature enables you to achieve high availability and link aggregation in a wireless medium by
using two or more parallel links and additional Link Aggregation Control Protocol (LACP) capable switches. 

To view and perform advanced Ethernet configuration, click Advanced in the Ethernet Interface Properties screen. The
following screen appears:

Operational Tx Mode

Displays the current operational transmission mode of the Ethernet interface. It supports 
two types of transmission modes:

•

Half Duplex: Allows one-way data transmission at a time.

•

Full Duplex: Allows two-way transmission simultaneously.

Speed And TxMode

Enables the user to select the speed and transmission mode of the Ethernet interface. By 
default, it is set to Auto. When set to Auto (recommended to set), both the transmitter 
and the receiver negotiate and derive at the best transmission mode. 

•

•

Admin Status

This parameter is applicable only when the device support more than one Ethernet
interface. By default, both the Ethernet interfaces of the device are enabled. The first 
Ethernet interface is always enabled; whereas the second Ethernet interface can be either 
enabled or disabled as desired.