Proxim Wireless Corporation XB92WFR ユーザーズマニュアル
Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide
80
Figure 5-25 Advanced Ethernet Configuration
Given below is the table which explains Advanced Ethernet parameters and the method to configure the configurable
parameter(s):
parameter(s):
After configuring the required parameters, click OK and then COMMIT.
5.4 Wireless
The Wireless tab allows you to configure wireless properties (such as Network Name, Channel Bandwidth, DDRS and ATPC)
on the device, which enables wireless communication between the Base Station and Subscriber, and Quick Bridges.
on the device, which enables wireless communication between the Base Station and Subscriber, and Quick Bridges.
The features configurable under Wireless tab are as follows:
•
Parameter
Description
Auto Shutdown
This parameter facilitates LACP capable Ethernet switches to use two or more QuickBridge
links to achieve higher throughput and redundancy. By default, it is Disabled.
links to achieve higher throughput and redundancy. By default, it is Disabled.
If Auto Shutdown is enabled on the Ethernet Interface, then the Ethernet port will be
automatically disabled, when the wireless link is DOWN. It will be automatically enabled
once the wireless link is UP again.
automatically disabled, when the wireless link is DOWN. It will be automatically enabled
once the wireless link is UP again.
: This feature works only if STP/LACP Frames is set to passthru (See
(Bridge Only)
)
Tsunami
®
QuickBridge devices that are part of LACP link cannot be managed through the
switches, so it is recommended to use the second Ethernet port for management.
: When using second Ethernet port for management, ensure to disable Auto
Shutdown for Ethernet2.
For details on how to manage the QuickBridge devices through the second Ethernet port,
refer
refer
.