National Datacomm Corporation 0610S11 ユーザーズマニュアル

InstantWave  PCI/PC Card   

Getting Started

This section explains how to quickly setup a wireless station.

To install the InstantWave PCI Card into a computer, simply follow these steps:

step1.    Turn off the power to your computer and all peripherals and unplug the

power cord from the wall socket

step2.    Remove the computer’s cover

step3.    Select a free PCI Bus expansion slot and remove the slot cover

step4.    Carefully install the card in the expansion slot (Figure 5) by firmly

pressing until the card is snugly seated.  Be sure the card is fully home.
Fasten the retaining bracket with the screw from the slot cover

step5.    Replace the computer cover

 

and reconnect the previously disconnected

cables

step6.    Screw the antenna into the InstantWave card (Figure 6 )