National Datacomm Corporation 0610S11 ユーザーズマニュアル
6
Instant
Wave
PCI/PC Card
step7. Repeat the above procedure to fit an InstantWave card into each of the
other computers to be networked
PC Card Installation
The PC Card fits into a Type II or Type III PCMCIA slot. The antenna is encased
in a plastic case, in line with the main body of the PC card, such that it extends
outside the PCMCIA slot when the card is inserted. The slot must allow for a card
extension of up to 30mm as specified in the PC Card specifications.
in a plastic case, in line with the main body of the PC card, such that it extends
outside the PCMCIA slot when the card is inserted. The slot must allow for a card
extension of up to 30mm as specified in the PC Card specifications.
step1. Insert the PC Card into the Type II slot of the computer. Insert the card
with the 68-pin connector facing the slot and the label facing up
(Figure 7)
(Figure 7)
Figure 7. Inserting the PC Card
step2. Repeat the above procedure for each of the other computers to be
networked
LEDs
The PCI and PC Card each have two LEDs. Both will blink when the adapter is
initialized. In normal use the green LED blinks when the adapter transmits data,
and the orange LED blinks on data reception.
initialized. In normal use the green LED blinks when the adapter transmits data,
and the orange LED blinks on data reception.