MilDef Crete Inc. DR10 ユーザーズマニュアル
Chapter Two - 18
Operating Information
5. Locate the setting for Intel Rapid Start Technology, and click the check box to enable it.
6. Press the F4 key to save settings, exit BIOS, and restart the computer.
Create a Hibernation Partition on the SSD
7. In the operating system, click the Windows Start button.
8. In the Search box, type in cmd.exe.
9. Right-click on the cmd tool and select Run as administrator.
10. A command line utility will open. Type in diskpart.exe and press Enter.
11. At the DISKPART> prompt, type the following commands, in the order shown:
6. Press the F4 key to save settings, exit BIOS, and restart the computer.
Create a Hibernation Partition on the SSD
7. In the operating system, click the Windows Start button.
8. In the Search box, type in cmd.exe.
9. Right-click on the cmd tool and select Run as administrator.
10. A command line utility will open. Type in diskpart.exe and press Enter.
11. At the DISKPART> prompt, type the following commands, in the order shown:
DISKPART>list disk
DISKPART>select disk X
(X is the disk number where you want to create the store partition. Refer to results from “list
di
(X is the disk number where you want to create the store partition. Refer to results from “list
di
sk” for exact disk number. Disk must be an SSD)
DISKPART>create partition primary size=Y000
(Y is the size in GB for the partition. For example, for 8 GB, the value should be 8000. The
value of Y should be equal or larger than the amount of memory in the system)
DISKPART>detail disk
DISKPART> select Volume Z
(Z is Volume of your store partition. Refer to results from “detail disk” for exact volume
number)
DISKPART>set id=84 override
(The id must be set to 84)
DISKPART>exit