MilDef Crete Inc. RF9 ユーザーズマニュアル

ページ / 60
 
 
 
Chapter Two - 13
Operating Information
Put disk into the ODD 
While the power is ON, push the ejecting button of ODD. The tray will 
release. Then gently pull the tray out. Put the disk with its label facing up 
on the holder and push the tray back into the cabinet. Any dirt on the data 
side of the disk may cause to the erroneous read. Please avoid touching 
the data side. 
 
Read from the ODD 
The ODD may be designated as drive D: or higher depending on your 
configuration. You may access to it in DOS or Windows. Please avoid 
shock or vibration when the optical device is active. 
 
 Express and PCMCIA Cards                             
 
 
The computer supports one PCMCIA II and one Express card or two 
PCMCIA II cards. To remove the card, push the button on the right of the 
card to eject it. The ejecting button can hide into the compartment by 
pushing it inward gently. 
 
  DVI                                                                                                       
 
 
LCD and DVI monitor can simultaneously display under Windows. Before 
entering Windows, the system will detect DVI as the first priority.   
 
Windows setting: 
Control panel -> Intel(R) Extreme Graphics -> Display Selection 
 
Display resolution of notebook LCD and DVI monitor must be identical. 
 
  RTC                                                                                                       
 
 
Battery backed up RTC (Real Time Clock/Calendar) is built in an on-board 
CMOS (Complementary Metal Oxide Semiconductor) chip. The RTC 
keeps track of the time and date while the computer is off. The CMOS chip 
also stores system setup information. 
 
RTC battery is also recharged when AC adapter is attached. Recharge 
the computer approximately once per month to ensure RTC operation.