MilDef Crete Inc. RF9 ユーザーズマニュアル
Chapter Two - 14
Operating Information
Replacing Modules
To remove the modules:
1. Turn OFF the computer or hibernate.
2. Disconnect all cables from the computer.
3. Use a coin to turn and loose the screws on the modules.
4. Remove the battery from the compartment.
5. Push the latch knob to release the ODD or HDD module and push
them outward.
6. Remove the module from the computer.
To re-install the modules:
Gently push the module into the slot. Fasten the screw to fix the module.
Gently push the module into the slot. Fasten the screw to fix the module.
Caution
You must turn the power OFF before replacing the ODD and HDD
modules.
modules.