Charles Machine Works Inc The 2150GR250 ユーザーズマニュアル
2150GR Ground Penetrating Radar
054-139 - Rev. 1
26/36
¾ Press the
button to change the name of a selected survey; write
the new name then press the OK button to confirm the change (Fig. 5-14).
Fig. 5-14 – How to rename a survey
¾ Press the
button to reload the last survey and continue performing
scans in it.
¾ Press the
button to review all the scans contained in the selected
survey. The first radar map of the selected survey will appear, and more markers can
be added if required. All previously identified hyperbolas will be marked with a
circle and a vertical line (Fig. 5-15).
be added if required. All previously identified hyperbolas will be marked with a
circle and a vertical line (Fig. 5-15).
Fig. 5-15 – Insertion of a Marker during the review phase
!
NOTE
Additional hyperbolas can be selected, or previously inserted information
can be reloaded, using the mouse or the buttons on the lower tool bar. It is
sufficient to click in correspondence to the vertical line shown in Fig. 5-15.
can be reloaded, using the mouse or the buttons on the lower tool bar. It is
sufficient to click in correspondence to the vertical line shown in Fig. 5-15.
CIRCLE
VERTICAL
LINE