Charles Machine Works Inc The 752TKR0408 ユーザーズマニュアル

Information is transmitted directly to display at drilling unit when 
tracker is in remote guidance mode. Approximate distance from 
tracker to beacon (not the estimated depth of the drill head) is 
shown every 5 seconds.

Distance will not be correct within one and a half times the drill 
head depth. For example, if you are drilling at 4’(1.2 m), you will 
be able to drill within 6’ (1.8 m) of tracker. 

To operate in remote guidance mode, place unit in stand while it 
is turned off. Press and hold mode button while pressing on/off 
button.

Tracker and drill head can be up to 60’ (18.3 m) apart when in 
remote guidance mode. IMPORTANT: Do not drill past tracker.

Information is transmitted directly to display at drilling unit when 
tracker is in remote guidance mode. Approximate distance from 
tracker to beacon (not the estimated depth of the drill head) is 
shown every 5 seconds.

Distance will not be correct within one and a half times the drill 
head depth. For example, if you are drilling at 4’(1.2 m), you will 
be able to drill within 6’ (1.8 m) of tracker. 

To operate in remote guidance mode, place unit in stand while it 
is turned off. Press and hold mode button while pressing on/off 
button.

Tracker and drill head can be up to 60’ (18.3 m) apart when in 
remote guidance mode. IMPORTANT: Do not drill past tracker.