Charles Machine Works Inc The 752TKR0408 ユーザーズマニュアル

Beacons send a variety of information to tracker. All Ditch Witch 
beacons send pitch, roll, temperature and battery information. 

Beacon roll information is useful in determining the direction that 
the drilling tool will tend to travel when pushed without rotation. 
The following chart shows typical tool face roll indications for 
directional drilling.

To estimate beacon depth, press depth button. Estimated depth 
to beacon will be displayed. To change depth units, press depth 
and mode buttons.

All tracking and locating systems are subject to interference. To 
quickly check for interference, raise tracker 1’ (0.3 m) and make 
second depth estimate. If the difference between the two 
estimates is not 1’ (0.3 m), there is interference.

1 or 2 o’clock

up and right

3 o’clock

right

4 or 5 o’clock

down and right

6 o’clock

down

7 or 8 o’clock

down and left

9 o’clock

left

10 or 11 o’clock

up and left

12 o’clock

up

Beacons send a variety of information to tracker. All Ditch Witch 
beacons send pitch, roll, temperature and battery information. 

Beacon roll information is useful in determining the direction that 
the drilling tool will tend to travel when pushed without rotation. 
The following chart shows typical tool face roll indications for 
directional drilling.

To estimate beacon depth, press depth button. Estimated depth 
to beacon will be displayed. To change depth units, press depth 
and mode buttons.

All tracking and locating systems are subject to interference. To 
quickly check for interference, raise tracker 1’ (0.3 m) and make 
second depth estimate. If the difference between the two 
estimates is not 1’ (0.3 m), there is interference.

1 or 2 o’clock

up and right

3 o’clock

right

4 or 5 o’clock

down and right

6 o’clock

down

7 or 8 o’clock

down and left

9 o’clock

left

10 or 11 o’clock

up and left

12 o’clock

up