ParkerVision D2D00003 ユーザーズマニュアル

Horizons 1500WR Wireless 4-Port Router 

111

The following table describes the labels in this screen.
Configuring UPnP

Enable the Universal Plug 

and Play (UPnP) feature

Select this check box to activate UPnP. Be aware that anyone could use a 

UPnP application to open the web Web Configuration Utility’s login screen 

without entering the 1500WR Wireless Router’s IP address (although you must 

still enter the password to access the web Web Configuration Utility).

Allow users to make 

configuration changes 

through UPnP

Select this check box to allow UPnP-enabled applications to automatically 

configure the 1500WR Wireless Router so that they can communicate 

through the 1500WR Wireless Router, for example by using NAT traversal, 

UPnP applications automatically reserve a NAT forwarding port in order to 

communicate with another UPnP enabled device; this eliminates the need to 

manually configure port forwarding for the UPnP enabled application.

Allow UPnP to pass 

through Firewall

Select this check box to create a static LAN to LAN/1500WR Wireless Router 

rule that allows forwarding of ports 1900 and 80. Selecting this check box also 

creates a dynamic firewall rule every time a NAT forwarding port is reserved 

for UPnP. This setting remains active until you disable UPnP or clear this 

check box.

Clear this check box to have the firewall block all UPnP application packets 

(for example, MSN packets) instead of creating a firewall rule for them.

UPnP Name

This identifies the 1500WR Wireless Router in UPnP applications.

Apply

Click 

Apply to save your changes back to the 1500WR Wireless Router.

Reset

Click 

Reset to begin configuring this screen afresh.