Справочник Пользователя для ParkerVision D2D00003
Horizons 1500WR Wireless 4-Port Router
111
ParkerVision
14.3 Configuring UPnP - Continued
The following table describes the labels in this screen.
Configuring UPnP
Configuring UPnP
LABEL
DESCRIPTION
Enable the Universal Plug
and Play (UPnP) feature
Select this check box to activate UPnP. Be aware that anyone could use a
UPnP application to open the web Web Configuration Utility’s login screen
without entering the 1500WR Wireless Router’s IP address (although you must
still enter the password to access the web Web Configuration Utility).
Allow users to make
configuration changes
through UPnP
Select this check box to allow UPnP-enabled applications to automatically
configure the 1500WR Wireless Router so that they can communicate
through the 1500WR Wireless Router, for example by using NAT traversal,
UPnP applications automatically reserve a NAT forwarding port in order to
communicate with another UPnP enabled device; this eliminates the need to
manually configure port forwarding for the UPnP enabled application.
Allow UPnP to pass
through Firewall
Select this check box to create a static LAN to LAN/1500WR Wireless Router
rule that allows forwarding of ports 1900 and 80. Selecting this check box also
creates a dynamic firewall rule every time a NAT forwarding port is reserved
for UPnP. This setting remains active until you disable UPnP or clear this
check box.
Clear this check box to have the firewall block all UPnP application packets
(for example, MSN packets) instead of creating a firewall rule for them.
UPnP Name
This identifies the 1500WR Wireless Router in UPnP applications.
Apply
Click
Apply to save your changes back to the 1500WR Wireless Router.
Reset
Click
Reset to begin configuring this screen afresh.