SMC Networks 8014WN2 ユーザーズマニュアル
錯誤! 尚未定義樣式。
11
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Hardware Overview
SMC8014WN Front and Rear panels
The front panel of the SMC8014WN Wireless Cable Modem Gateway contains a set of light-
emitting diode (LED) indicators that show the status of the Gateway and simplify
troubleshooting. Figure 1 shows the front panel LEDs and Table 1 describes the them.
emitting diode (LED) indicators that show the status of the Gateway and simplify
troubleshooting. Figure 1 shows the front panel LEDs and Table 1 describes the them.
Figure 1. Front Panel of the SMC8014WN Wireless Cable Modem Gateway
Table 1. SMC8014WN Front Panel LEDs
LED
Color
Description
Power
Green
ON = power is supplied to the Gateway.
OFF = power is not supplied to the Gateway.
OFF = power is not supplied to the Gateway.
Diag
Green
ON =- system failure. Reboot Gateway.
OFF = normal operation.
OFF = normal operation.
Cable
Green
ON = connected to cable network successfully.
Flashing = attempting to connect to network.
Flashing = attempting to connect to network.
Traffic
Green
ON = cable modem has finished CMTS registration.
Flashing = attempting to register with CMTS.
Flashing = attempting to register with CMTS.
Wireless
Green
ON = wireless enabled.
Flashing = data is transmitting.
OFF = wireless disabled.
Flashing = data is transmitting.
OFF = wireless disabled.
WPS
Green
ON = enabled.
Flashing = data is transmitting.
Flashing = data is transmitting.
LAN (1-4)
Green
ON = connected at 10 Mbps or 100 Mbps.
Flashing = data is transmitting.
OFF = no Ethernet link is detected.
Flashing = data is transmitting.
OFF = no Ethernet link is detected.