Trimble Inc. CCKCDPD ユーザーズマニュアル
CrossCheck CDPD Mobile Unit Manual 2 9
Installation 2
Figure 2.11 illustrates the miniature antenna.
Figure 2.11
Miniature Magnetic GPS Antenna
To mount the Magnetic GPS Antenna:
1.
Choose the antenna mounting location (see Choosing the GPS
Antenna Mounting Location on page 2-20).
Antenna Mounting Location on page 2-20).
2.
Mount the antenna to a ferrous surface.
3.
Route the antenna cable.
The antenna features a permanent antenna cable which must be routed
to the location where the CrossCheck CDPD is mounted.
to the location where the CrossCheck CDPD is mounted.
,
Caution – The magnetic-mount antenna cable is exposed to the
environment. Wind could cause damage to the cable; use tie wraps to
secure the cable along its route.
environment. Wind could cause damage to the cable; use tie wraps to
secure the cable along its route.
See Routing the GPS Antenna Cable in the next section.