Hughes Network Systems 24SX-001 ユーザーズマニュアル

1027144– 0001  Revision D

Commissioning the RT   7–13

RT installation

Return to the IDU location to verify that the RT has acquired the
HT:

1.

Observe the CCM LCD to verify that the RT has
successfully acquired the HT frequency.

The following display indicates that the RT has successfully
acquired the HT.

Install 
Acq Ack: HT nnn

 The LCD will display 

Acq Deny

 (acquisition

denied) if:

•

The RT’s ESN has not been entered in the EMS
database, or

•

The RT is pointed toward the wrong HT.

Specify the appropriate attenuator value, and then take the IDU
out of Install mode:

1.

Scroll to the attenuator option:

Install
Mech Attn

2.

Scroll to the attenuator selection display:

Mech Attn
20 dB

3.

Scroll until the LCD shows the size of the installed
mechanical attenuator. If no attenuator is installed, select 

0 dB

. Press ENTER.

4.

Take the IDU out of Install mode: Select 

Exit

 and press

ENTER.

Install
Exit

7.5

7.6