JVC KENWOOD Corporation 378601 ユーザーズマニュアル

ページ / 37
6
S
cAn
 r
everT
The Scan Revert channel is the channel selected when you press the microphone 
PTT switch to transmit during scan.  Your dealer can program one of the following 
Scan Revert channels:
• 
Last Called + Selected:  The last channel on which you received a call is 
assigned as the new revert channel.  If the channel has been changed, the 
newly selected channel is assigned as the new revert channel.
• 
Selected:  The last channel selected is assigned as the new revert channel.
• 
Selected + Talkback:  If the channel has been changed, the newly selected 
channel is assigned as the new revert channel.  The transceiver “talks back” 
on the current channel.
• 
Priority 1/ Priority 2:  If your dealer has programmed a Priority channel 
(either Priority  or Priority 2), this channel is the revert zone and channel.
• 
Priority 1 + Talkback/ Priority2 + Talkback:  If your dealer has programmed 
a Priority channel (either Priority  or Priority 2), this channel is the revert zone 
and channel.  The transceiver “talks back” on the current receive channel.
S
cAn
 d
eleTe
/A
dd
You can add and remove zones and/or channels/group IDs to and from your scan 
list.
1  Select your desired zone and/or channel/group ID.
2  Press the key programmed as Zone Delete/Add (to add/remove zones) or 
Scan Delete/Add (to add/remove channels/group IDs).
•  You can also press and hold the key programmed as 
Scan Delete/Add to add/
remove zones.
p
rioriTy
-c
hAnnel
 S
elecT
If the Priority channel has been set as Operator Selectable by your dealer, you 
are also able to reprogram the Priority mode.
1  Select your desired zone and channel.
2  Press the key programmed as Priority-chanel Select, or press and hold the 
key programmed as 
Scan.
•  A list of channel types appears on the display.
3  Press the  /  keys to select the channel type for your current channel.
•  You can set the channel as “NORMAL”, “PRIORITY ”, “PRIORITY 2”, or  
“PRIORITY &2”.
4  Press the 
 key to save the setting and exit Priority-channel Select Mode.