JVC KENWOOD Corporation 378601 ユーザーズマニュアル

7

FleetSync is an Alphanumeric 2-way Paging Function, and is a protocol owned by 

Kenwood Corporation.  FleetSync enables a variety of paging functions on your 

transceiver, some of which depend on dealer programming.
Your dealer can set up either FleetSync or FleetSync II on your transceiver.  

Transceivers set up with FleetSync can communicate with other transceivers that 

have been set up with FleetSync.  Likewise, transceivers set up with FleetSync II  

can communicate with other transceivers set up with FleetSync II.  However, 

transceivers set up with FleetSync cannot communicate with transceivers that 

have been set up with FleetSync II, and vice-versa.

Note:  This function is available only in analog operation.

A Selcall is a voice call to a particular station or to a group of stations.

■

1  Select your desired zone and channel.
2  Press the key programmed as Selcall or Selcall + Status to enter Selcall 

mode.

3  Press the  /  keys to select the ID of the station you want to call.

•  If Manual Dialing is enabled, you can enter the station ID by using the 

microphone keypad, or by using 

the  /  keys.  When using the  /  keys, 

cycle through the digits to select a digit, then press the 

 key to set 

the digit and move the cursor to the right.  Repeat this process until the 

entire ID is entered.

4  Press the microphone PTT switch and begin your conversation.

■

  An alert tone will sound and the transceiver will automatically enter Selcall 

Mode.

  The calling station’s ID will appear when a Selcall is received.  When the call 

station’s ID appears on the display, you can respond to the call by pressing the 

microphone 

PTT switch and speaking into the microphone.