JVC KENWOOD Corporation 39923120 ユーザーズマニュアル

11

Press the 

switch to switch the transceiver ON.

• A beep sounds and the display momentarily lights up.

• If the Transceiver Password function is programmed, “PASSWORD” appears on the 

display.  You must enter the password to unlock the transceiver.  Refer to “Transceiver 
Password”, below.

Press and hold the 

switch for approximately 1 second to switch the transceiver 

OFF.

Q

To enter the password:

1 Rotate the CH control to select a digit.

2 Press the GRP

 key to accept the entered digit and move to the next 

digit.

3 Repeat steps 1 and 2 to enter the entire password.

• The password can contain a maximum of 6 digits.

• Press the PF 3 key to delete an incorrectly entered character.  Press and hold 

the PF 3 key to delete all characters.

4 Press the PF 2

NH\WRFRQÀUPWKHSDVVZRUG

• If you enter an incorrect password, an error tone sounds and the transceiver 

remains locked.

To enter the password using a DTMF keypad:

1 Press the DTMF keys corresponding to the password digits.

• The password can contain a maximum of 6 digits.

• Press the PF 3 or DTMF # key to delete an incorrectly entered character.  Press 

and hold the PF 3 or DTMF # key to delete all characters.

2 Press the PF 2 or DTMF

NH\WRFRQÀUPWKHSDVVZRUG

• If you enter an incorrect password, an error tone sounds and the transceiver 

remains locked.

Rotate the VOL control clockwise to increase the volume and counterclockwise to 
decrease the volume.