JVC KENWOOD Corporation 39923120 ユーザーズマニュアル

13

Q  M

Channels programmed for Conventional P25 and Trunking P25 operation 
already have a Group ID assigned.  For these channels, simply press and hold 
the PTT switch to make the call.

‡ 2Q7UXQNLQJFKDQQHOVLIWKHWUDIÀFFKDQQHOLVEXV\DEXV\PHVVDJHDSSHDUVDQG

the busy tone sounds.  Release the PTT switch and wait for the channel to become 
IUHH:KHQWKHWUDIÀFFKDQQHOEHFRPHVIUHHDSURFHHGWRQHVRXQGV

Otherwise, if a key has been programmed with Talkgroup (Conventional P25 
only), you can select a group ID from the list to make a call to those parties.
To select a group ID:

1 Press the key programmed as Talkgroup.

2 Press the GRP

 and 

 keys or rotate the CH control to select a group 

ID/name from the list that has been pre-entered into your transceiver.

• The target group ID/name appears on the display.

3 Press the PF 1 key to accept the group ID/name.

4 Press and hold the microphone PTT switch to make the call.

• Speak into the transceiver as you would during a normal transmission.

Q  M

If a key has been programmed with Individual, you can make calls to 
VSHFLÀHGSHUVRQV

1 Press the key programmed as Individual.

2 Press the GRP

 and 

 keys or rotate the CH control to select a unit ID 

from the list that has been pre-entered into your transceiver.

• Alternatively, you can directly enter a unit ID by using a DTMF keypad.

• The target unit ID/name appears on the display.

3 Press and hold the microphone PTT switch to make the call.

• Speak into the transceiver as you would during a normal transmission.

• On Trunking channels, a ringing tone will sound and the display will alternate 

between the called unit ID/name and “CALLING”.

4 On Trunking channels, to end the call, press the PF 1 key or the keypad #

key.