Giant Electronics Ltd 2G4DSS24NS3 ユーザーズマニュアル

4)  During the setting mode, Press “Stop” button to exit menu setting, a beep can

be heard to validate the setting.

5)  The default is Toll Saver.

l  This DAM has three voice mailboxes.(Mailbox 1, Mailbox2, Mailbox3)
l  Each mailbox has its own LED.
l  If the mailbox has messages that have been played, its LED will be solid red.
l  If it has new message, the corresponding LED is blinking.
l  If it has no message, the corresponding LED is turn off.
l  Callers using a corded telephone can select the mailbox in which their

messages will be recorded by pressing *1, *2 or *3 while the DAM plays the
outgoing announcement. All other messages will be recorded in mailbox

l  The default setting is mailbox 1.
l  If an incoming call comes during Mailbox recording/playback, the unit will

be stop recording or playing mode automatically and start to ring.

l  When the DAM announces “please select a mailbox”, press the other keys

should be disabled except press Mailbox1, Mailbox 2, or Mailbox3 button.

l  If the built-in phone line is connected during any mailbox mode, the unit

should be exit mailbox mode automatically and go to talk mode.

9.2.1 Record a memo

You can record a memo message to the answering machine for later review or for
your families.
1)  In standby mode, press  Rec/memo key, the DAM announces “ please select a
mailbox”.

2)  Press a Mailbox button to select a mailbox for the memo, it will announce

“now recording”  a beep, After the beep, speak loudly toward the microphone.
The 7-segments LED displays the length of your memo from “0 ” to “59  ”.

or 

or 

3)  Press “Stop” button to end the recording, the 7-segment LED will indicate the

number of total new messages with flashing digits.

PDF created with FinePrint pdfFactory trial version