Giant Electronics Ltd 2G4DSS24NS3 ユーザーズマニュアル

9.4.3 Memory full/ Answer only/ Answer off

1)    If select answer only mode, send an incoming ring to the unit. DAM will
answer after 2 or 4 rings, and play the announcement 2, and then go to standby
state. If do not record the announcement 2, it will use the default announcement 2.
2)    If select answer off mode, send an incoming ring to the unit. DAM will
answer after 10 rings then a 3-second beep can be heard.
3)  If the memory is full, send an incoming ring to the unit. DAM will answer

after 10 rings then a 3-second beep can be heard.

4)  If no valid code input within 15 seconds, a beep is heard and line disconnect,

it go to standby state, no message recorded.

9.5.1 In Standby Mode

1)     Press UP/Down key to enter volume setting, the current volume level number
will display on the 7-segments LED.

2)  Press Up/Down key to increase/ decrease the volume level, the 7-segments

LED displays the volume number ( 1 - 8 ).

 

9.5.2 During message playback

1)     Press UP/Down key to enter volume setting, the current volume level number
will display on the 7-segments LED.

2)   Press Up/Down key to increase/ decrease the volume level, the 7-segments

LED displays the volume number ( 1 - 8 ).

 

PDF created with FinePrint pdfFactory trial version