Giant Electronics Ltd 2G4DSSL2400 ユーザーズマニュアル
OLYMPIA OL24
0
0 Owner's Manual
11
4 Handset Registration Procedure
A Handset, which has not been registered, will display:
NOT REGISTERED
PLACE IN BASE
Plug the power supply into a live electrical outlet and the DC connector into the bottom of the Base. Place the Handset (with battery
pack plugged in) into the Base cradle. In approximately 60 seconds, the Handset will beep, indicating registration has been
completed. The Handset display will say “READY.”
A previously registered Handset will display “OUT OF SERVICE” if taken out of range or if the Base loses power.
pack plugged in) into the Base cradle. In approximately 60 seconds, the Handset will beep, indicating registration has been
completed. The Handset display will say “READY.”
A previously registered Handset will display “OUT OF SERVICE” if taken out of range or if the Base loses power.
OUT OF SERVICE
Return to the Base or power up the Base again, then place the Handset in the Base cradle. In approximately one minute, the Handset
will regain its registration.
will regain its registration.