CALAMP WIRELESS NETWORKS INC. 1409123000 ユーザーズマニュアル
CONFIGURATION
001-9193-001 Version 2
Page 39 of 52
Sentry 4G
TM
User
Manual
5.6.3
Port Forwarding
Port Forwarding is used to provide remote access to third party devices on the LAN, such as Web
Cameras or printers. Port Forwarding routes incoming requests from the WWAN, with a specific port
to a local device with a static IP. Note: the value 0.0.0.0 can be entered in the Source IP Address if
data from any IP Address is to be forwarded.
Cameras or printers. Port Forwarding routes incoming requests from the WWAN, with a specific port
to a local device with a static IP. Note: the value 0.0.0.0 can be entered in the Source IP Address if
data from any IP Address is to be forwarded.
Figure 19 - Port Forwarding
5.6.4
Routing Table
The table in Figure 20 shows a list of all routes (static and dynamic).
Figure 20 - Routing Table
5.6.5
Interface Priority
When there is more than one WAN interface up at the same time, the unit needs to make a selection
on where to put the default route and what DNS servers must be used. To select interface priority
navigate to Interface Priority tab under Router Settings (see Figure 21).
Note: Highest priority is given to the interface identified as having Priority Number 1.