Crestron Electronics Inc MP-FSMIC ユーザーズマニュアル

Crestron MP-FSMIC

FreeSpeech™

 

Wireless Microphone

Installation Guide

Crestron Electronics, Inc. 

15 Volvo Drive   Rockleigh, NJ 07647 

Tel: 888.CRESTRON 

Fax: 201.767.7576  

Specifications subject to 

www.crestron.com 

change without notice.

Wireless Communication

  RF 

2.4 GHz ISM Device; 79 Channels FHSS (2402 

   

to 2480 MHz)

  IR 

38 kHz 

  Range (typical) 

50 ft (~15 m) indoor, subject to site-specific 

   

conditions (requires MP-FS-RX1 or MP-FS-RX2 

   

receiver)*

Battery

  Battery Type 

Lithium Ion Polymer, 3.7 Volt, 180 mAh

  Usage per Charge 

6 hours 

  Charging Time 

2 hours

  Cycle life 

>500 cycles (80% capacity)

   

(Requires MP-FSDS2 docking station/charger)*

Environmental

  Temperature 

41° to 104° F (5° to 40° C)

  Humidity 

10% to 90% RH (non-condensing)

Enclosure 

Plastic, matte black, includes magnetic clip for 

   

lapel or lanyard attachment

Dimensions

  Height 

2.10 in (54 mm)

  Width  

1.00 in (26 mm)

  Depth 

0.95 in (24 mm)

Weight 

0.7 oz (20 g)

Included Accessory

  MP-FS-LANYARD 

Lanyard for MP-FSMIC

Available Accessories 

  MP-FS-RX1 

FreeSpeech Single-Channel Wireless Mic Receiver

  MP-FS-RX2 

FreeSpeech Dual-Channel Wireless Mic Receiver 

  MP-FS100_PAK 

FreeSpeech Single-Channel Wireless Mic System 

   

Package

  MP-FS200_PAK 

FreeSpeech Dual-Channel Wireless Mic System 

   

Package              

  MP-FSDS2 

FreeSpeech Dual Wireless Mic Docking Station/

   

Charger 

  MP-FSTTS 

Tabletop Stand for MP-FSMIC 

                

                      

Specifications for the MP-FSMIC are listed in the following table.
MP-FSMIC Specifications

If you cannot locate specific information or have questions after reviewing this 

guide, please take advantage of Crestron's award winning customer service 

team by calling Crestron

®

 at 1-888-CRESTRON [1-888-273-7876]. For 

assistance in your region, please refer to the Crestron Web site 

(www.crestron.com) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron Web site 

ww.crestron.com/onlinehelp) to ask questions about Crestron products. 

First-time users will need to establish a user account to fully benefit from all 

available features.

As Crestron improves functions, adds new features and extends the 

capabilities of the MP-FSMIC, additional information may be made available as 

manual updates. These updates are solely electronic and serve 

as intermediary supplements prior to the release of a complete technical 

documentation revision.
Check the Crestron Web site periodically for manual update availability and its 

relevance. Updates are identified as an “Addendum” in the Download coumn.

Crestron FreeSpeech™ systems provide a very simple and affordable 

solution for adding speech reinforcement as part of a complete classroom 

media presentation system. Compact and lightweight, the MP-FSMIC can be 

clipped to a lapel, hung around the neck, or placed in a tabletop stand*. As 

part of a complete FreeSpeech wireless mic system, the MP-FSMIC affords 

reliable and hassle-free operation. Simply press the 

ON button and go.

Advanced FreeSpeech RF/IR wireless technology ensures consistent 

performance with complete freedom of movement — and minimized risk of 

noise or feedback. The infrared “beacon” signal prevents interference 

between multiple FreeSpeech systems in adjacent rooms, and even shuts 

the mic off automatically if the instructor leaves the room with the mic on.
An internal rechargeable battery provides six hours of usage to last a full 

school day. Recharging for up to two MP-FSMICs is handled by the 

MP-FSDS2 docking station*. 

*Item(s) are sold separately or as part of a MP-FS100_PAK or MP-FS200_PAK system package.

*Item(s) are sold separately or as part of a MP-FS100_PAK or MP-FS200_PAK system package.

.

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help

As of the date of manufacture, the MP-FS-RX1 and MP-FS-RX2 have been tested and found to comply with 

specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling

.

This Class B digital apparatus complies with Canadian ICES-003. 

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: 

(1) This device may not cause harmful interference and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance 

could void the user’s authority to operate the equipment. 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 

measures: