Crestron Electronics Inc MP-FSMIC 用户手册
Crestron MP-FSMIC
FreeSpeech™
Wireless Microphone
Installation Guide
Crestron Electronics, Inc.
Installation Guide - DOC. 7166
15 Volvo Drive Rockleigh, NJ 07647
(2030245)
Tel: 888.CRESTRON
06.11
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
SPECIFICATION
Wireless Communication
RF
2.4 GHz ISM Device; 79 Channels FHSS (2402
to 2480 MHz)
IR
38 kHz
Range (typical)
50 ft (~15 m) indoor, subject to site-specific
conditions (requires MP-FS-RX1 or MP-FS-RX2
receiver)*
Battery
Battery Type
Lithium Ion Polymer, 3.7 Volt, 180 mAh
Usage per Charge
6 hours
Charging Time
2 hours
Cycle life
>500 cycles (80% capacity)
(Requires MP-FSDS2 docking station/charger)*
Environmental
Temperature
41° to 104° F (5° to 40° C)
Humidity
10% to 90% RH (non-condensing)
Enclosure
Plastic, matte black, includes magnetic clip for
lapel or lanyard attachment
Dimensions
Height
2.10 in (54 mm)
Width
1.00 in (26 mm)
Depth
0.95 in (24 mm)
Weight
0.7 oz (20 g)
Included Accessory
MP-FS-LANYARD
Lanyard for MP-FSMIC
Available Accessories
MP-FS-RX1
FreeSpeech Single-Channel Wireless Mic Receiver
MP-FS-RX2
FreeSpeech Dual-Channel Wireless Mic Receiver
MP-FS100_PAK
FreeSpeech Single-Channel Wireless Mic System
Package
MP-FS200_PAK
FreeSpeech Dual-Channel Wireless Mic System
Package
MP-FSDS2
FreeSpeech Dual Wireless Mic Docking Station/
Charger
MP-FSTTS
Tabletop Stand for MP-FSMIC
DETAILS
SPECIFICATIONS
Specifications for the MP-FSMIC are listed in the following table.
MP-FSMIC Specifications
MP-FSMIC Specifications
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service
team by calling Crestron
®
at 1-888-CRESTRON [1-888-273-7876]. For
assistance in your region, please refer to the Crestron Web site
(www.crestron.com) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron Web site
You can also log onto the online help section of the Crestron Web site
ww.crestron.com/onlinehelp) to ask questions about Crestron products.
First-time users will need to establish a user account to fully benefit from all
available features.
Future Updates
As Crestron improves functions, adds new features and extends the
capabilities of the MP-FSMIC, additional information may be made available as
manual updates. These updates are solely electronic and serve
as intermediary supplements prior to the release of a complete technical
documentation revision.
Check the Crestron Web site periodically for manual update availability and its
Check the Crestron Web site periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download coumn.
Crestron FreeSpeech™ systems provide a very simple and affordable
solution for adding speech reinforcement as part of a complete classroom
media presentation system. Compact and lightweight, the MP-FSMIC can be
clipped to a lapel, hung around the neck, or placed in a tabletop stand*. As
part of a complete FreeSpeech wireless mic system, the MP-FSMIC affords
reliable and hassle-free operation. Simply press the
ON button and go.
Advanced FreeSpeech RF/IR wireless technology ensures consistent
performance with complete freedom of movement — and minimized risk of
noise or feedback. The infrared “beacon” signal prevents interference
between multiple FreeSpeech systems in adjacent rooms, and even shuts
the mic off automatically if the instructor leaves the room with the mic on.
An internal rechargeable battery provides six hours of usage to last a full
An internal rechargeable battery provides six hours of usage to last a full
school day. Recharging for up to two MP-FSMICs is handled by the
MP-FSDS2 docking station*.
DESCRIPTION
MP-FSMIC
*Item(s) are sold separately or as part of a MP-FS100_PAK or MP-FS200_PAK system package.
*Item(s) are sold separately or as part of a MP-FS100_PAK or MP-FS200_PAK system package.
.
Regulatory Compliance
Federal Communications Commission (FCC) Compliance Statement
Industry Canada (IC) Compliance Statement
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
As of the date of manufacture, the MP-FS-RX1 and MP-FS-RX2 have been tested and found to comply with
specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling
.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures: