Buffalo 09101457-0 ユーザーズマニュアル

• Rejected (returns the rejected 

packet to the point of origin)
•  Accepted (passes the packet 

through) 
with each rule.  You may also 

choose:
• 

Destination IP Address - 

The IP address to be fi ltered.
• 

Source IP Address - The IP 

address designated for fi ltering. 

If all IP addresses must be 

fi ltered, leave this box blank. 

Warning: If administrator makes a rule that all packets from LAN are Ignored or Rejected, they 

will no longer have access to the AirStation confi guration screens.  This rule prohibits further setup 

from a wireless or wired computer.  The AirStation can be returned to the factory default settings 

by holding down the INIT button on the back of the unit for fi ve seconds or until the red DIAG light 

becomes solid. 
Protocol  - You may also choose to fi lter all protocols, ICMP, arbitrary protocol number, or TCP/

UDP protocol number.
• 

All - Selects all IP protocols.

IP Filter 

setting