Buffalo 09101457-0 사용자 설명서
52
• Rejected (returns the rejected
packet to the point of origin)
• Accepted (passes the packet
• Accepted (passes the packet
through)
with each rule. You may also
with each rule. You may also
choose:
•
•
Destination IP Address -
The IP address to be fi ltered.
•
•
Source IP Address - The IP
address designated for fi ltering.
If all IP addresses must be
fi ltered, leave this box blank.
Warning: If administrator makes a rule that all packets from LAN are Ignored or Rejected, they
will no longer have access to the AirStation confi guration screens. This rule prohibits further setup
from a wireless or wired computer. The AirStation can be returned to the factory default settings
by holding down the INIT button on the back of the unit for fi ve seconds or until the red DIAG light
becomes solid.
Protocol - You may also choose to fi lter all protocols, ICMP, arbitrary protocol number, or TCP/
Protocol - You may also choose to fi lter all protocols, ICMP, arbitrary protocol number, or TCP/
UDP protocol number.
•
•
All - Selects all IP protocols.
IP Filter
setting
Advanced Settings