Taicom Data Systems Co Ltd AWL1000G ユーザーズマニュアル

ADSL Line Status: It displays the ADSL connection process and status. The different states for 
this field are as follows: 
 

  Activation: The Router is in this state when it is attempting to start the activation process. 
  Initialization: The Router is initializing handshake with the CO. 
  Training: It is a part of the handshake process with the CO. 
  Channel Analysis: It is a part of the handshake process with the CO. 
  Exchange: It is a part of the handshake process with the CO. 
  Down: It indicates that the ADSL connection is down. 
  Showtime: It indicates that a connection has been established between the Router and the 

CO. 

 
ADSL Modulation: It displays the ADSL modulation status, which can either be G.dmt or 
T1.413. 
 
ADSL Annex Mode: It displays the ADSL annex mode, which can either be Annex A or Annex 
B. 
 
ADSL Startup Attempts: It displays the number of ADSL connection attempts after loss of 
showtime. A connection attempt is recorded only if showtime is attained. 
 
ADSL Max TX Power: It displays the transmit output power level of the CPE (Customer 
Premise Equipment), which is the transmit output power level of the Router. 
 
ADSL CO Vendor: It displays the Central Office (CO) DSLAM vendor name, if available. If the 
Router is not connected to an ADSL vendor, then ‘UNUSED_VENDOR_0’ will appear in this 
field. 
 
Elapsed Time: It displays the time of the Router has been in operation. This is the amount of 
time the Router is on, not the amount of time it is connected to the PC or in showtime status. 
 
A table contained the information of SNR Margin, Line Attenuation, Errored Seconds, Loss 
of Signal, Loss of Frame, CRC Errors, Data Rate, and Latency is also available. 
 

 

 

9