Taicom Data Systems Co Ltd AWL1000G ユーザーズマニュアル

5. Configuration Pages

The links under Configuration column are associated to the pages that represent the configurations
of system and interfaces. These pages can be viewed and modified by both user and admin
accounts.

When any settings are changed, please go to the Save Settings page to save the new

setting(s) and reboot the Router. Changes will not take effect until the settings are saved and the
Router is rebooted. If power is lost before saving, all new configurations since the last save will
be lost, even if they were submitted.

5.1 Modes

Table 5-1 lists the mode configurations.

Table 5-1 Mode Configuration

WAN

Configuration

Bridge Mode

Router Mode

(PPPoA/PPPoE)

Router Mode

(Dynamic IP)

Router Mode

(Static IP)

Half Bridge

IP Address

N/A Automatically

assigned by ISP

Automatically
assigned by ISP

Provided by ISP Automatically

assigned by ISP

Subnet Mask N/A Automatically

assigned by ISP

Automatically
assigned by ISP

Provided by ISP Automatically

assigned by ISP

Gateway

N/A Automatically

assigned by ISP

Automatically
assigned by ISP

Provided by ISP Automatically

assigned by ISP

Encapsulation 1483 Bridged IP

LLC, 1483
Bridged IP
VC-Mux

PPPoA
LLC/VC-Mux,
PPPoE LLC/VC-Mux

1483
Bridged/Routed IP
LLC, 1483
Bridged/Routed IP
VC-Mux,
Classical IP over
ATM

1483
Bridged/Routed
IP LLC, 1483
Bridged/Routed
IP VC-Mux,
Classical IP over
ATM

PPPoA
LLC/VC-Mux,
PPPoE
LLC/VC-Mux

Bridge

Enabled Disabled Disabled Disabled Disabled

PPP Service

N/A

Provided by ISP

N/A

Provided by ISP

PPP User Name N/A

Provided by ISP

N/A

Provided by ISP

PPP Password N/A

Provided by ISP

N/A

Provided by ISP

DHCP Client

Enable

Unchedked Unchedked

Checked

Unchedked Unchedked

PPP Half Bridge Disabled Disabled

Disabled Disabled

DHCP Server Disabled Enabled

Enabled Enabled

NAT

Disabled Enabled

(Dynamic

NAPT)

Enabled (Dynamic
NAPT)

Enabled
(Dynamic NAPT)

Disabled

DNS Proxy

Disabled Enabled

Enabled Enabled Disabled

Bridge Mode: Bridge Mode is used when there is one PC connected to the LAN-side Ethernet
port. IEEE 802.1D method of transport bridging is used to bridge between the WAN (ADSL) side
and the LAN (Ethernet) side, i.e., to store and forward.

Router Mode: Router Mode is used when there is more than one PC connected to the LAN-side
Ethernet port. This enables the ADSL WAN access to be shared with multiple nodes on the LAN.
Network Address Translation (NAT) is supported so that one WAN-side IP address can be shared
among multiple LAN-side devices. DHCP is used to serve each LAN-side device and IP address.