Biolase Inc. EPIC-1 ユーザーズマニュアル
EPIC™10 User Manual
pg. 40
5400525 Rev B
9. CALIBRATION
9.1 CALIBRATION SCHEDULE
Calibration procedure is recommended to be performed every twenty-four (24) months in order
to maintain the required accuracy of output power versus displayed power. Annual calibrations
can be performed at a certified depot repair facility. Call BIOLASE Service at 1-800-321-6717 or
your Authorized Service Representative to schedule an appointment.
to maintain the required accuracy of output power versus displayed power. Annual calibrations
can be performed at a certified depot repair facility. Call BIOLASE Service at 1-800-321-6717 or
your Authorized Service Representative to schedule an appointment.
10. SOFTWARE SPECIFICATION
BIOLASE respects the intellectual property of others, and we ask our users to do the same.
EPIC 10 software is protected by copyright and other intellectual property laws.
EPIC 10 software is protected by copyright and other intellectual property laws.
This product contains proprietary, copyrighted software developed by BIOLASE, Inc. All rights
reserved in the USA and other countries.
reserved in the USA and other countries.
11. TROUBLESHOOTING
Should any of the on-screen messages listed in Figure 11.1 appear, follow the troubleshooting
instructions for the specific message as noted below.
instructions for the specific message as noted below.
NOTE:
For any on-screen message not listed in Figure 11.1, re-power the laser console; if
the message does not clear, call BIOLASE Service at 1-800-321-6717 or your
authorized Service Representative
the message does not clear, call BIOLASE Service at 1-800-321-6717 or your
authorized Service Representative