Psion Inc 7505BTHC25 ユーザーズマニュアル
Chapter 5: Settings
Imager
Imager
162
iKôn Rugged PDA (Windows Mobile 6) User Manual
Enable Codablock F
Set this parameter to on to enable “Codablock type F”.
Set this parameter to on to enable “Codablock type F”.
Field Size/Char
Refer to “Field Size” on page 137 for details.
Refer to “Field Size” on page 137 for details.
5.28.3 Imager
•
Tap on the Scanner dropdown menu, and choose Imager.
5.28.3.1 Options–Imager
TekImager Enabled
Setting this option to on enables the imager installed in your PDA.
Setting this option to on enables the imager installed in your PDA.
Continuous Scan Mode
Setting this parameter to on keeps image capture active and continuously decoding as long
as the scanner button is pressed and held down.
Setting this parameter to on keeps image capture active and continuously decoding as long
as the scanner button is pressed and held down.
Center Bar Code Only
When more than one bar code is visible in a single snap shot, this parameter allows you to
specify that only the centre image within the imager framing marker be read. When this pa-
specify that only the centre image within the imager framing marker be read. When this pa-
Note: This parameter must be disabled when reading Composite bar codes.