Psion Inc 7505BTHC25 ユーザーズマニュアル
Chapter 5: Settings
Imager
iKôn Rugged PDA (Windows Mobile 6) User Manual
163
rameter is set to on, the target dot is pointed at the centre image and only that image is
returned.
returned.
Max Number Barcodes
This parameter specifies the maximum number of bar codes the imager will attempt to
decode in an image. A maximum of 6 bar codes can be decoded at one time.
This parameter specifies the maximum number of bar codes the imager will attempt to
decode in an image. A maximum of 6 bar codes can be decoded at one time.
Barcodes Must Decode
This parameter specifies the minimum number of bar codes that the imager must decode in
order to report success.
This parameter specifies the minimum number of bar codes that the imager must decode in
order to report success.
Window Width
“Window Width” determines the width of the captured image in pixels.
“Window Width” determines the width of the captured image in pixels.
Window Height
This parameter determines the height of the captured image in pixels.
This parameter determines the height of the captured image in pixels.
Dot Time (msec)
The value selected for “Dot Time (msec)” determines (in milliseconds) how long the target-
ing dot remains on before the scanner begins capturing images. When you double-tap on this
parameter, a dialog box is displayed in which you can enter a value of between 0 and 3000.
A value of 0 disables the target dot.
The value selected for “Dot Time (msec)” determines (in milliseconds) how long the target-
ing dot remains on before the scanner begins capturing images. When you double-tap on this
parameter, a dialog box is displayed in which you can enter a value of between 0 and 3000.
A value of 0 disables the target dot.
5.28.3.2 Advanced Options – Imager
Note: This number must be less than the number of bar codes assigned to
“Max Number Barcodes”. The driver validates and reassigns the value
if necessary.
Note: The driver will validate and reassign the value assigned to this parameter, if neces-
sary; the driver will also use the Window Width value to horizontally center the
image in the field of view.
Note: The driver will validate and reassign the value assigned to this parameter, if neces-
sary; the driver will also use “Window Height” value to vertically center the image
in the field of view.
Important: Do not adjust the advanced options without first consulting Psion Teklogix
technical support.