Arris 3347W ユーザーズマニュアル
180
IP Settings
You can use the command line inter face to specify whether
TCP/IP is enabled, identify a default Gateway, and to enter
TCP/IP settings for the Cayman Gateway LAN and WAN por ts.
TCP/IP is enabled, identify a default Gateway, and to enter
TCP/IP settings for the Cayman Gateway LAN and WAN por ts.
☛
NOTE:
For the DSL platform you must identify the vir tual
PPP inter face [
PPP inter face [
vccn
], a number from 1 to 8.
Common Settings
set ip option { on | off }
Enables or disables TCP/IP ser vices in the Cayman Gateway.
You must enable TCP/IP ser vices before you can enter other
TCP/IP settings for the Cayman Gateway. If you turn off TCP/IP
ser vices and save the new configuration, the Cayman Gateway
clears its TCP/IP settings.
You must enable TCP/IP ser vices before you can enter other
TCP/IP settings for the Cayman Gateway. If you turn off TCP/IP
ser vices and save the new configuration, the Cayman Gateway
clears its TCP/IP settings.
DSL Settings
set ip dsl vccn address ip_address
Assigns an IP address to the vir tual circuit. Enter 0.0.0.0 if you
want the vir tual circuit to obtain its IP address from a remote
DHCP ser ver.
want the vir tual circuit to obtain its IP address from a remote
DHCP ser ver.
set ip dsl vccn broadcast broadcast_address
Specifies the broadcast address for the TCP/IP network con-
nected to the vir tual circuit. IP hosts use the broadcast address
nected to the vir tual circuit. IP hosts use the broadcast address