Arris 3347W ユーザーズマニュアル
182
Ethernet Hub Settings
set ip ethernet option { on | off }
Enables or disables communications through the designated
Ethernet por t in the Gateway. You must enable TCP/IP functions
for an Ethernet por t before you can configure its network set-
tings.
Ethernet por t in the Gateway. You must enable TCP/IP functions
for an Ethernet por t before you can configure its network set-
tings.
☛
NOTE:
Currently, the only option is
on
; it cannot be set to
off
.
set ip ethernet A address ip_address
Assigns an IP address to the Cayman Gateway on the local area
network. The IP address you assign to the local Ethernet inter-
face must be unique on your network. By default, the Cayman
Gateway uses 192.168.1.254 as its LAN IP address.
network. The IP address you assign to the local Ethernet inter-
face must be unique on your network. By default, the Cayman
Gateway uses 192.168.1.254 as its LAN IP address.
set ip ethernet A broadcast broadcast_address
Specifies the broadcast address for the local Ethernet inter-
face. IP hosts use the broadcast address to send messages to
ever y host on your network simultaneously.
face. IP hosts use the broadcast address to send messages to
ever y host on your network simultaneously.
The broadcast address for most networks is the network num-
ber followed by 255. For example, the broadcast address for
the 192.168.1.0 network would be 192.168.1.255.
ber followed by 255. For example, the broadcast address for
the 192.168.1.0 network would be 192.168.1.255.