HM Electronics Inc BS500 ユーザーズマニュアル
13
D. Message Repeater Operation
1. Record
To record messages for the message repeater, press the MESSAGE
REPEATER button in, on the bottom of the base station, and do
the following:
REPEATER button in, on the bottom of the base station, and do
the following:
ACTION
RESULT
Press and release the RECORD
MODE button on the base
station once.
MODE button on the base
station once.
The red MESSAGE RECORD
light on the base station
will come on.
will come on.
Press and hold button B on the
headset and talk into the
headset microphone to record a
message (up to 8 seconds).
headset and talk into the
headset microphone to record a
message (up to 8 seconds).
The MESSAGE RECORD light on
the base station will begin
blinking.
the base station will begin
blinking.
To record
Message
Message
#1
Release button B.
The record function will
stop and the MESSAGE RECORD
light will go off.
stop and the MESSAGE RECORD
light will go off.
Press and release the RECO RD
MODE button on the base
station twice.
MODE button on the base
station twice.
The green MESSAGE RECORD
light on the base station
will come on.
will come on.
Press and hold button B on the
headset and talk into the
headset microphone to record a
message (up to 8 seconds).
headset and talk into the
headset microphone to record a
message (up to 8 seconds).
The MESSAGE RECORD light on
the base station will begin
blinking.
the base station will begin
blinking.
To record
Message
#2
Message
#2
Release button B.
The record function will
stop and the MESSAGE RECORD
light will go off.
stop and the MESSAGE RECORD
light will go off.
2. Playback
Locate the S7 and S8 DIP switches at the bottom-center of the
audio circuit board inside the base station for the following
settings. Refer to Figure 8.
audio circuit board inside the base station for the following
settings. Refer to Figure 8.
Message #1
• S8 switch #7 in the ON position enables Message #1 to be
• S8 switch #7 in the ON position enables Message #1 to be
played.
• will be triggered by a vehicle present signal if S7 switch
5 is in the OFF position. The playing message can be
cancelled by pressing button A on the headset.
cancelled by pressing button A on the headset.
• will be triggered by an alert signal if S7 switch 5 is in
the ON position.
• will be played to the locations selected if S7 switches 2,
3 and/or 4 are in the ON position.
Switch 2 enables Message #1 to be played back in
all HS500 headsets.
Switch 3 enables Message #1 to be played back on
the outside speaker.
Switch 4 enables Message #1 to be played back on
the ceiling speakers.
all HS500 headsets.
Switch 3 enables Message #1 to be played back on
the outside speaker.
Switch 4 enables Message #1 to be played back on
the ceiling speakers.
Message #2
• S8 switch #8 in the ON position enables Message #2 to be
• S8 switch #8 in the ON position enables Message #2 to be
played.
• will be triggered by a vehicle present signal if S8 switch
5 is in the OFF position. The playing message can be
cancelled by pressing button A on the headset.
cancelled by pressing button A on the headset.
• will be triggered by an alert signal if S8 switch 5 is in
the ON position.