Tait International Limited TBCH1A ユーザーズマニュアル

TB9400 Installation and Operation Manual

© Tait Limited April 2014

TBAA03-13 auxiliary support brackets can be fitted to the rear of the 
subrack to provide additional mounting security. 

standard TBAA03-13 bracket 

b

 fitted in a typical Tait cabinet 

c

. If you 

are not using the Tait cabinet, you may have to make your own brackets to 
suit your installation.

Notice You must fit the auxiliary support brackets if you intend to 
transport a cabinet fitted with a fully built-up base station.

We also recommend that you fit the brackets under the following 
conditions:

■

when the installation is in an area prone to earthquakes

■

when third party equipment is installed hard up underneath the base 
station subrack.

We recommend that you try to route all cables to and from the base station 
along the side of the cabinet so the cooling airflow is not restricted.

c

b