Westell Inc. A9080YYXX-07 ユーザーズマニュアル

 

 

 

 

 

030-300459 Rev. A 

10 

July 2005 

 User Guide 

UltraLine II (Model 800015) 

 

 
This section explains the LED States and Descriptions of your Modem. LED indicators are used to verify the unit’s 
operation and status.  
 

LED States and Descriptions 

Modem power is ON. 

Modem is in reset mode. 

Modem power is OFF. 

MoCA list impaired less than 30 Mbs 

Ethernet Link 

Ethernet or MoCA activity present ( traffic in either direction). 

Modem power is OFF, no cable, or no powered device is 
connected to the associated port. 

Internet link established. 

IP connection established and IP Traffic is passing through 
device (in either direction). 
Note: If the IP or PPP session is dropped due to an idle timeout, 
the light will remain solid green, if an ADSL connection is still 
present.  
If the session is dropped for any other reason, the light is turned 
OFF. The light will turn red when it attempts to reconnect and 
DHCP or PPP fails). 

Device attempted to become IP connected and failed (no DHCP 
response, no PPP response, PPP authentication failed, no IP 
address from IPCP, etc.). 

Modem power is OFF, Modem is in Bridge Mode, or the 
connection is not present. 

Powered device is connected to the associated port (includes 
devices with wake-on LAN capability where slight voltage is 
supplied to an Ethernet connection). 

10/100 Base-T Ethernet LAN activity is present (LAN traffic in 
either direction). 

(LAN) 

E1, E2, E3, E4 

Modem power is OFF, no cable or no powered device is 
connected to the associated port. 

MoCA link impaired less than 30 Mbs. 

Ethernet Link. 

Ethernet or MoCA activity is present (traffic in either direction). 

Modem power is OFF, no cable or no powered device is 
connected to the associated port. 

Wireless is enabled and functioning. 

Wireless LAN activity present (traffic in either direction).