Westell Inc. A9080YYXX-07 ユーザーズマニュアル
UltraLine II – Draft 1
030-300459 Rev. A
7/12/05
030-300459 Rev. A
11
July 2005
User Guide
UltraLine II (Model 800015)
Off
Wireless is disabled or not functioning.
NOTE: Safe Boot is reflected when the Power and Internet LED’s are both Red and all other LED’s are off.
5.2 Cable Connectors and Switch Locations
• Reset switch
• 4 Ethernet connectors (RJ-45)
• WAN connector (RJ-45) yellow
• Power connector (barrel)
• On/Off power switch
• Coax connector
• Wireless IEEE 802.11b/g SMA connector and antenna
• 4 Ethernet connectors (RJ-45)
• WAN connector (RJ-45) yellow
• Power connector (barrel)
• On/Off power switch
• Coax connector
• Wireless IEEE 802.11b/g SMA connector and antenna
Figure 1. Rear View of UltraLine II
5.3 Connector
Descriptions
The following chart displays the connector types for the UltraLine II.
SYMBOL
N
AME
T
YPE
F
UNCTION
ETHERNET
(E1, E2, E3, E4)
RJ-45
10/100 Base-T Ethernet Connection to PC or Hub.
WAN RJ-45
WAN can function as a 10/100 Base-T Ethernet
connection to a WAN-side networking device. (e.g.,
xDSL, etc.), a DMZ LAN Port, or a fifth Ethernet
LAN Port, depending on the configuration.
connection to a WAN-side networking device. (e.g.,
xDSL, etc.), a DMZ LAN Port, or a fifth Ethernet
LAN Port, depending on the configuration.
12VDC
POWER
Barrel connector
Connection to DC (12V) Power Connector.
ETHERNET
(E1, E2, E3, E4)
12 VDC POWER
RESET
COAX
WIRELESS
WAN