Westell Inc. A9080YYXX-07 ユーザーズマニュアル

 

 

 

 

 

030-300459 Rev. A 

60 

July 2005 

 User Guide 

UltraLine II (Model 800015) 

 
 
 
 
 
 
 

 
The following settings will be displayed if you select WAN > Routing Table from the Configuration menu. To add 
a route to the Network Routing Table, select the desired options from the drop-down menus, and then enter the 
appropriate values in the fields provided. Next, click Add Route. 
 

 

 
 

The list of active interfaces on the Modem, their IP addresses and subnet masks.  
Address 

The IP interface address of the interface. 

Subnet Mask 

The subnet mask of the interface. 

Name 

The name assigned to the interface. 
Possible Names are: 
ppp0 – The WAN interface when the router is in PPP mode. 
WAN– The WAN interface when the router is in Uplink Routed IP mode. 
Private LAN – The main Ethernet interface. 
Private LAN2 – The interface for Private LAN2 mode. 
Private LAN3 – The interface for Private LAN3 mode. 
Public LAN – The interface for Private LAN mode.

 

l0 – The local loopback interface. 

Metric 

The numeric value assigned to this interface, used to calculate the best route to a destination 
address. 

The list of the network routes. These can be either routes for directly connected networks, or static routes that have 
been entered. 
Destination  

The IP subnet of the destination network. 

Subnet Mask 

The subnet mask of the destination network. 

Gateway 

The IP address of the default gateway for this route. 

Interface 

Indicates the name of the router’s interface to use for this route. 

Metric 

The numeric value assigned to this route, used to calculate the best route to a destination 
network. 

The list of host routes. A host route is an IP route with a 32-bit mask. 
Destination 

The IP address of the destination host. 

Gateway 

The IP address of the default gateway for this route. 

Interface 

Indicates the name of the router’s interface to use for this route.