Westell Inc. A9081XXYY-07 ユーザーズマニュアル

 

 

 

 

 

030-300479 Rev. A 

47 

October 2005 

 User Guide 

 

 
The following screen will be displayed if you select LAN > DHCP from the Configuration menu. This page enables 
you to control how the Gateway interacts with local devices to which it is connected. Enter the appropriate values, 
and then click Save to save your settings. 
 
NOTE: Westell recommends that you do not change these settings unless instructed by your Internet service 
provider. 
 

 

 
 

DHCP Configuration for Private LAN 

Enable DHCP Server 

Factory Default = Enable 
This setting allows the Gateway to automatically assign IP addresses to local devices 
connected on the LAN. Westell advises setting this to enabled for the private LAN. 
Private LAN = DHCP addresses will be saved into the Private LAN configuration. 
Public LAN = DHCP addresses will be saved into the Public LAN configuration. (This 
option is only available if the Public LAN DHCP server is enabled.)  
Possible Response: 
If this box is checked, the DHCP server will be turned On. 
If this box is unchecked, the DHCP server will be turned Off. 
Note: These addresses will be overwritten if the Internet Service Provider supports 
dynamic setting of these values. 

Modem IP Address 

The IP Address of the Gateway 

Subnet Mask 

The Subnet Mask of the Gateway 

Address Range 

DHCP Start Address 

Factory Default = 192.168.1.10